Galvanized Steel Water Tank Tower:
This hot dip galvanized tank is suitable for:
1) the construction water storing,
2) the regulating tank,
3)heating system's inflation water tank,
4)the condensate tank as well as the building construction,
5)the geological prospecting,
6)the industry,
7) the defense project, firefighting, fire proof water storage.
8) and other temporarily store water tank.
The standard:
The hot dipped galvanized steel water tank is a new type water tank manufactured according to the GB:2SS177.
2, The HDG steel plate of the water tank:
1) The plate is press by the special equipment, the surface is smooth, and the concave shape of the plate is good for reduce the pressure of the water pressed to the plate.
2) This plate is made of Q235 steel.
3)The thickness: 3mm,2.5mm,2mm,1.5mm it is different according the size of the tank.
4) The size of the hot dip galvanized steel plate: 1000mm*1000mm, 1000mm*500mm, 500mm*500mm.
5) The size of the water tank, it can be design according the size of the location place, the tallest height is 5meters.
Hot Dipped Galvanized Steel Water Tank
Introduction to HDG Steel Water Tank
Our hot dipped galvanized steel water tank is a new-type modular water tank manufactured according to the GB:2SS177 standard. Assembled from standardized hot-dip galvanized steel plates, the tank provides clean, durable water storage for building water supply, heating systems and industrial use.
Main Features of the HDG Water Tank
Strong, smooth plates – Plates are pressed by special equipment with a smooth surface; the concave plate shape reduces water pressure on the tank wall.
Reliable material – Plates are made of Q235 steel with thickness of 3mm, 2.5mm, 2mm or 1.5mm, selected according to tank size.
Standardized panels – Panel sizes: 1000mm×1000mm, 1000mm×500mm and 500mm×500mm, which simplify transport, assembly and future expansion.
Customizable dimensions – Tank size is designed according to the installation space; the maximum height is 5 meters.
Wide Application Scenarios
The hot dip galvanized tank is suitable for: 1) construction water storage, 2) regulating tanks, 3) heating system expansion/water-feeding tanks, 4) condensate tanks and building construction water supply, 5) geological prospecting, 6) industrial water storage, 7) defense and firefighting/fire-proof water storage, 8) other temporary water storage needs.
One-stop Supporting Service
We supply tanks and full accessories including inlet pipe, outlet pipe, overflow mouth, internal ladders and tank tower support structures. Design, quotation and shipping can be arranged for building contractors, engineering companies and importers worldwide.
FAQ
Q1: What sizes can the galvanized water tank be made in? A: The tank is designed according to your installation space, with a maximum height of 5 meters. Provide your required capacity or dimensions for a design proposal.
Q2: Which plate thickness should I choose? A: Thickness is matched to tank size: 3mm, 2.5mm, 2mm or 1.5mm. Larger tanks use thicker plates for strength; our engineers will confirm the best choice in the design drawing.
Q3: Is the tank suitable for drinking water storage? A: The tank is designed for building water supply, heating, industrial and firefighting storage. Confirm your water quality requirement with us before ordering.
Installation:
The installment of the hot dip galvanized water tank.
1) Make the bases of the water tank: concrete base or steel support tower.
Make sure the bases at the same horizontal level, and the connection of the bottom plate loaded on the support bases.
2) According to the direction of the water tank, welding connection, or connect by the bolts and nuts.
3) After assembled, put in water to test the leakage. After fill full water 12hours, if not leakage, the water tank can be used normally.
